| MAESTRO ACTIVE EDGE HUMAN-MACHINE INTERFACE SOFTWARE (HMI) |
|
| SWINGING CONSOLLE WITH INTEGRATED PC "eye - M" |
|
| Volt |
400 EU |
| Frequency |
50 Hz |
| 400V/50HZ POWER SUPPLY WITH NEUTRAL |
|
| PROCESSING OF PANELS WITH LENGTH OR WIDTH LOWER THAN THE
STANDARD ONES |
|
| SINGLE-SIDED EDGE BANDER EXECUTION WITH WORKING UNITS FITTED ON
RIGHT SIDE |
|
| "EASY SIZE" INFEED GUIDE WITH ELECTRONIC POSITIONING |
|
| 300 MM EXTENSION OF ENTRY GUIDE AND PANEL SUPPORT |
|
| KIT “SAV€NERGY PACK PLUS” |
|
| OUTFEED BELT TRANSFER |
|
| CLEAN PACK L FOR PROTECTED EDGES - ONE SHOULDER |
|
| FIXED LATERAL PANEL SUPPORT |
1600 (80-112) |
| AAR" SPRAY ANTI-ADHESION UNIT - FIXED WORKING LINE, R.H |
|
| RT-H" PREMILLING UNIT, 4 KW, R.H |
|
| ELECTRONIC POSITIONING FOR 1ST COPYING DEVICE INSTEAD OF THE
MANUAL POSITIONING |
|
| NR.2 DIAMOND TOOLS "ED SYSTEM" D=100 H=64 (Z=3+3) INSTEAD OF H=49 |
|
| HM 3002 QMS-P" GLUING UNIT FOR STRAIGHT PROCESSING, R.H. |
|
| RPS" HEATING DEVICE, FOR MAX. 60 MM THICK PANELS (300 mm) |
|
| SGP” GLUE POT WITH NC DOSAGE INSTEAD OF STANDARD |
|
| QMS-P” HOT MELT GRANULATE FEEDING SYSTEM |
|
| ELECTRONIC POSITIONING OF EDGE GUIDE |
|
| ELECTRONIC POSITIONING OF THE PRESSURE ROLLERS |
|
| KIT FOR DISABLING THE SOLID WOOD MACHINING ON "HM 3002" GLUING
UNIT |
|
| AAG" ANTI-ADHESIVE DEVICE FOR THE FIRST PRESSURE ROLLER |
|
| CLEAN PACK" FOR EDGE EXCEEDING ZONE |
|
| 3 ADDITIONAL PRESSURE ROLLERS |
|
| VERTICAL 6 COIL MAGAZINE WITH AUTOMATIC CHANGEOVER WITH PLIERS
(MAX. H=65) |
|
| HORIZONTAL 1 COIL MAGAZINE ADDED TO THE VERTICAL MAGAZINE.
SUITABLE FOR DELICATE EDGES |
|
| "YU/SP-1000" UPPER END TRIMMING UNIT, 0,5 KW, R.H |
|
| "RSU-E 2P NC" FINE TRIMMING UNIT, 1 KW, R.H. |
|
| 1,8 KW MOTORS INSTEAD OF 1 KW |
|
| KIT FOR ADDITIONAL OPPOSITE COPYING FOR THIN/NARROW PANELS |
|
| "NESTING LOCK" KIT FOR "RSU-E" |
|
| EXHAUST HOODS WITH TEFLON COATING INSTEAD OF STANDARD FOR
"RSU-E" |
|
| NO. 2 "ED SYSTEM" HM TOOL HEADS R OR STRAIGHT/R=2 |
|
| NO. 2 TOOL HEADS 45°STRAIGHT/R INSTEAD OF STRAIGHT/R |
|
| CORNER ROUNDING UNIT "ROUND 4" RH |
|
| MULTIEDGE KIT FOR 3 AUTOMATIC POSITIONS STRAIGHT/R/R |
|
| C LATERAL FEELER/TOOL POSITIONING |
|
| NO. 4 DIAMOND TOOLS 45° STRAIGHT MAX 2 MM/ 20° STRAIGHT MAX 0,8
MM/R=2 |
|
| "RCS-E" EDGE SCRAPER UNIT, R.H. |
|
| 2 AUTOMATIC POSITION KIT R/R |
|
| WASTE PRODUCT DETACHMENT SYSTEM |
|
| NC AXIS FOR VERTICAL POSITIONING |
|
| KIT FOR OPPOSITE COPYING FOR NARROW/THIN PANELS |
|
| NESTING LOCK" KIT FOR "RCS-E" EDGE SCRAPING UNIT |
|
| NO. 2 PLATES R=1/R=2 |
|
| NO. 2 PLATES STRAIGHT 45°/R INSTEAD OF R/R |
|
| "RCA/2C" GLUE SCRAPING UNIT, R.H. |
|
| ANTI-ADHESIVE DEVICE FOR CUTTER CLEANING "RCA/2C" GLUE SCRAPER |
|
| SP/F" OVERLAPPED BRUSHING UNIT, R.H |
|
| PNEUMATIC CUT-OFF AND OSCILLATION FOR "SP/S", "SP/F" |
|
| NO. 2 RIEPE BRUSHES FOR PLASTIC EDGES FOR EDGE BRIGHTING FOR SP/F |
|
| PH/1600" DOUBLE EDGE BRIGHTENING UNIT UNIT, R.H. |
|
| "MX80/U" GROOVING UNIT WITH THE SAME ROTATION AS THE FEED
DIRECTION, 5,5 KW, R.H. |
|
| ELECTRONIC POSITIONING (HORIZONTAL, VERTICAL AND 0-90° ROTATION) |
|
| ADDITIONAL EXHAUST HOOD FOR GROOVING NIT |
|
